We love robots, DIY and funny science. JJROBOTS aims to bring Open robotic projects closer to the people by providing hardware, good documentation, building instructions+code, "how it works" info and a lot of fun!
B-ROBOT is a remotely controlledself-balancing arduino robot created with 3D printed parts. With only two wheels, B-ROBOT is able to maintain its balance all the time by using his internal sensors and driving the motors. You can control your Robot, making him move or spin, by sending commands via a Smartphone, Tablet or PC while it maintains its balance.
An internet controlled robot capable of writing+drawing (and wiping!) on a glass surface.
The iBoardbotis a robot connected to the internet capable of writing texts and drawing with great precision. Also, it can erase in a quick and effective way.
Send to your iBoardbot your information from any part of the world. As it has a multi-user interface you can also play and challenge your kids, use it as a collaborative notice board or as a twitter wall in your shop window. Have fun and enjoy learning how to assemble your iBoardbot!
We have been working (HARD) on an affordable and very easy to assemble Air hockey robot. With improved behaviour and only using the electronics and ancillary elements we are already using in all our other robots.
For this new version, we have switched to a new easier to set Cartesian X-Y system to move the robot, improved the VISION system and added some new cool features. Now, it is very easy to assemble, set up and control.
As always, the Air Hockey robot will be an OPEN SOURCE robot, so everyone could modify and customise it as much as desired. All the documentation, code and 3D models will be available as soon as it is released.
It has been easy to modify the original B-robot EVO adding new Off-road wheels (regular 83 mm diameter RC buggy wheels, quite easy to get and inexpensive). If you already have a B-robot, just modified the parameters indicated below in its code or upload this slightly modified CODE version to the Arduino: BROBOT OFFROAD
I have seen several interesting projects of robots that paint or manufacture PCBs, etc ... but I was looking for something different...
My daughter loves the Air Hockey game and I love robotics so one day an idea born in my mind... can I construct...??... Mmmmm .... it seemed very complicated and with many unresolved questions (puck detection??, robot speed??), but that is also part of the fun...
Based on the idea of use standard RepRap 3D printer parts :
NEMA17 stepper motors, drivers, Arduino Mega, RAMPS, belts , bearings, rods, printed pieces ... I started to develop the project...
We have received some emails asking for this KIT:
A set that includes EVERYTHING. So, during the nights, we have been working hard in the dungeon finding the best possible stepper motors, servos, buttons... and creating and stocking thisnew KIT.
Everything is included, previously thoroughly tested so you only need to assemble it.
Have a look to the video and watch how it behaves now!:
Well, this is a side project. Using the same B-robot electronic Brain SHIELD and two servos you can remotely control (via Smartphone´s WIFI) a laser pointer and play with it from far away (maximum range up to 50-60 meters). It is portable if you use a small 7-9 volts battery (Lipo/Alkaline/...).
Drive your neighbour´s cat crazy from a distance by placing the robot on the roof!.
More info here!
and will stay...forever!
This revolutionary (and not costly) new WIFI module offers a lot of features.
So, we have decided to embed it in our robot Brains.
The result: lower prices and increased capabilities.
Now, for example, the NewB-Robot Electronic Brain comes with the WIFI module already integrated, for much less money!
Have a look to the SHOP!